SignaMax SC30010, Cli Reference Manual

Page: 196 / 671

Chapter 8
| Authentication Commands
Authentication Sequence
– 196 –
command - Displays the privilege level for all commands modified
by the privilege command.
Command Mode
Privileged Exec
Example
This example shows the privilege level for any command modified by the
privilege command.
Console#show privilege command
privilege line all level 0 accounting
privilege exec level 15 ping
Console(config)#
Authentication Sequence
Three authentication methods can be specified to authenticate users logging
into the system for management access. The commands in this section can be
used to define the authentication method and sequence.
authentication enable
This command defines the authentication method and precedence to use
when changing from Exec command mode to Privileged Exec command mode
with the
enable command. Use the no form to restore the default.
Syntax
authentication enable {[ local ] [ radius ] [ tacacs ]}
no authentication enable
local - Use local password only.
radius - Use RADIUS server password only.
tacacs - Use TACACS server password.
Default Setting
Local
Command Mode
Global Configuration
Table 37: Authentication Sequence Commands
Command Function Mode
authentication enable Defines the authentication method and precedence for
command mode change
GC
authentication login Defines logon authentication method and precedence GC