Chapter 4
| System Management Commands
Line
– 119 –
session-id
– The session identifier for an SSH, Telnet or console
connection. (Range: 0-8)
Command Mode
Privileged Exec
Command Usage
Specifying session identifier “0” will disconnect the console connection.
Specifying any other identifiers for an active session will disconnect an SSH or
Telnet connection.
Example
Console#disconnect 1
Console#
Related Commands
terminal
This command configures terminal settings, including escape-character, lines
displayed, terminal type, width, and command history. Use the
no
form with
the appropriate keyword to restore the default setting.
Syntax
terminal
{
escape-character
{
ascii-number
|
character
} |
history
[
size
size
] |
length
length
|
terminal-type
{
ansi-bbs
|
vt-
100
|
vt-102
} |
width
width
}
escape-character
- The keyboard character used to escape from
current line input.
ascii-number
- ASCII decimal equivalent. (Range: 0-255)
character
- Any valid keyboard character.
history
- The number of lines stored in the command buffer, and
recalled using the arrow keys. (Range: 0-256)
length
- The number of lines displayed on the screen.
(Range: 24-200, where 0 means not to pause)
terminal-type
- The type of terminal emulation used.
ansi-bbs
- ANSI-BBS
vt-100
- VT-100
vt-102
- VT-102
width
- The number of character columns displayed on the
terminal. (Range: 0-80)
