SignaMax CommandView FO-098-8080, User Manual, Page: 19 / 32

15
bank boundary.
•
The right button is CH+. Push this button to advance to
the next powered-on PC in the cycle, and it will cross the
bank boundary.
If the CH+ button is pushed and held over 1 second, the
SCAN LED will be lit, and the buzzer will beep twice; now
the FO-098-8080 KVM Switch is in SCAN mode. To return
to NORMAL mode, either push the CH+ button on the front
panel and release within 1 second, or press the SPACE bar
on the keyboard.
Keyboard Hot Keys
Select a PC by the keyboard hot keys:
Press the Scroll Lock key twice within 1 second to enter Hot
Key mode. In Hot Key mode, the keyboard status LED will
flash and wait further input from the user; after the user’s
action is completed, press the ESC key to leave Hot Key
mode.
Note: Pressing a key means to depress the key then
release it immediately; if the input is correct, the
buzzer will beep to confirm it.
•
To switch to the next powered-on PC:
→
Press the ‘RIGHT SHIFT’ key.
•
To switch to the previous powered-on PC:
→
Press the ‘LEFT SHIFT’ key.
•
To select a BANK directly: