Signamax Connectivity Systems ______________________________________________ 065-7542
Ⅱ
.
To connect 065-7542 Switch to a Switch or a Hub
Use straight-through twisted pair cable to connect 065-7542
Switch to another Switch or Hub on uplink port. If you
connect 065-7542 Switches on port 1 to port 24, the cable
should be changed to crossover cable.
Technical Specification
1. Standards Compliance
-
IEEE 802.3 10BASE-T
-
IEEE 802.3u 100BASE-TX
2. Number of Ports
- 24 integrated ports (10/100Mbps N-Way port)
3. Fully Flow Control Supported
- Half-duplex mode: Backpressure
- Full-duplex mode: IEEE 802.3x
4. Network Transmission Media
- 10Base–T Cat. 3, 4, 5 UTP/STP
- 100Base–TX Cat. 5 UTP/STP
- System: POWER
5. Network Status Monitoring LEDs
- Per port: LINK/ACT, 10/100M
www.signamax-us.com
www.signamax-eu.com