Signamax
065-1163 F series RS-232/422/485 to 100BaseFX Media Converter
Configuration
20
field and enter the IP address of the TFTP server in the IP
address field to perform the upgrade.
Load System Default
The Load System Default command allows a user to restore
factory default settings to the converter. From the Main
Menu, highlight the Load System Default field and hit the
<ENTER>
key to execute.
System Restart
The System Restart allows a user to perform a ‘warm’
restart and validate newly saved configuration to the media
converter. From the Main Menu, highlight the System
Restart field and hit the
<ENTER>
key to reset the unit.
Command Line Interface (Telnet)
The media converter is accessible via a remote computer
using Telnet. After completing the steps outlined to connect
the devices (see Connection to Data Terminal Equipment in
previous chapter), proceed with the directions below to
login to the management facility using a remote computer. )
The converter is preset with a factory IP address that must
be configured to the user’s individual IP address. It is
important to do this so that the converter doesn’t conflict
