Signamax Connectivity Systems __________________________________________ 065-7942
16
PVID
When the VLAN-enabled Switch receives a tagged packet, the packet will be sent to
the port’s default VLAN according to the PVID (port VLAN ID) of the receiving port.
Items
Functions
Port
Port Number 1~24
Egress
Select
“tagged”
in the drop menu to enable the PVID checking
and tag inserting of one port, and select
“untagged”
to cancel.
For example, if an Egress-tagged port receives an untagged
frame, it will be transmitted as a PVID tagged frame. For the detail
tagging status, please refer to the following table.
Untagged
Tagged
Packet
Frames In
Packet
Frames Out
Packet Frames In Packet Frames
Out
Untagged
Untagged
Untagged
Tagged (PVID)
Tagged
Untagged
Tagged (VID)
Tagged (VID)
Pri-tagged
Untagged
Pri-tagged
Tagged (PVID)
PVID
Port VLAN ID(1~4094)
Only
tagged
Enable:
block all untagged packets from accessing this port.
Disable:
All packets are allowed to access this port.
Aggregation/ Trunk Configuration
To set up the port trunk groups, put the selected ports’ numbers into the same
Aggregation group. You can choose up to eight groups. Don’t forget to click “Apply” to
save the settings.
There are three aggregation modes for you to set up, SMAC, DMAC, and XOR. SMAC
mode selects the path of packets according to Source MAC while DMAC mode selects
path according to Destination MAC. XOR mode calculates the result of the DMAC and
