Default gateway:
For the routed packet, if the destination is not in the routing table, all the traffic is put into the
device with the designated IP address, known as default router. Basically, it is a routing policy.
For assigning an IP address to the switch, you just have to check what the IP address of the
network will be connected with the switch. Use the same network address and append your host address
to it.
Fig. 2-8
First, IP Address: as shown in the Fig. 2-8, enter “192.168.1.1”, for instance. For sure, an IP
address such as 192.168.1.x must be set on your PC.
Second, Subnet Mask: as shown in the Fig. 2-8, enter “255.255.255.0”. Any subnet mask such as
255.255.255.x is allowable in this case.
2-2. Typical Applications
The 24-Port GbE Web Smart Switch implements 24 Gigabit Ethernet TP ports with auto MDIX and
four slots for the removable module supporting comprehensive fiber types of connection, including LC and
BiDi-LC SFP modules. For more details on the specification of the switch, please refer to Appendix A.
The switch is suitable for the following applications.
*The switch image is a sample only
Central Site/Remote site application is used in carrier or ISP (See Fig. 2-10)
Peer-to-peer application is used in two remote offices (See Fig. 2-11)
Office network(See Fig. 2-12)
Central
