Signamax
™
065-7931 16-Port 10/100/1000BaseT/TX Web Smart Switch
74
4-2-9. Bandwidth Management
Function name:
Bandwidth Management
Function description:
Bandwidth Management function is used to set up the limit of Ingress and
Egress bandwidth for each port.
Note:
Each port of t
he switch
owns
16KB packet buffer. The packet buffer size will
be reduced when the bandwidth rate limitation
is
enabled,
which
may cause
that jumbo frame cannot be forwarded
.
Please avoid enabling jumbo frame and bandwidth rating function
s
at the
same time.
Fig. 4-19
Parameter description:
Port Number:
Choose the port that you would like this function to work on it. Valid
range of the port is 1~16. If you would like to set up all ports at a time,
user is also allowed to choose “All” in the selection list to simplify the
procedure of configuration.
All Traffic for Ingress Rate Limiting:
Set up the limit of Ingress bandwidth for the port you choose. Incoming
traffic will be discarded if the rate exceeds the value you set up in Data
Rate field. Pause frames are also generated if flow control is enabled.
The format of the packet limits to unicast, broadcast and multicast. Valid
range is 0~1000.