3
SignalFire Telemetry
Rev 1.3
Connections and Components
Radio LEDs
-
The Radio TX LED (
green
) flashes each time a radio packet is sent. This LED will blink rapidly while
searching for the radio network.
-
The Radio RX LED (
red
) blinks on each received radio packet.
Status LEDs
-
The Active LED (
green
) will blink at boot up and will blink rapidly when the sensor is being powered and
read.
-
The ERROR LED (
red
) will blink to indicate an error condition.
Scan/Checkin Button
-
If this button is pressed the Sentinel will take a reading from the RTD and send those values to the
gateway.
