SC5506A Operating & Programming Manual
Rev 2.1.1
36
R
E V I S I O N
N
O T E S
Rev 1.0.0
Initial release.
Rev 1.0.2
Added SPI programming Instructions.
Rev 1.1.0
Added documentation on the usage of pin 18 of the digital IO connector to be used for
setting the SPI mode on startup or reset.
Rev 1.1.3
Combined in RS-232 documentation.
Rev 1.1.4
Corrected Table 10.
Rev 1.1.5
Corrected section on SPI communication, corrected for missing references.
Rev 1.1.6
Updated EN and IEC testing standards and EU Directive references, minor rewrites
throughout manual.
Rev 1.2.0
Removed legacy SPI information
Rev 2.0.0
Added revision 2 API information to take advantage of firmware revision 4 and later
Rev 2.1.0
Added note for pin 8 in Table 2 as reset_b
Rev 2.1.1
Corrected SPI information to include device with firmware rev 4 or later