3
Dear customer,
Thank you for choosing the Charger SICO 5006. You have purchased a high quality technical
device used in the industrial field. We hope that all of your expectations are met and that we
are able to support your work.
This product was designed, produced and tested with due care and according to the applica-
ble European Standards. If the device is yet not working correctly under the conditions given
in this operating manual, please contact the manufacturer:
Signal Concept GmbH
Suedring 11
04416 Markkleeberg
GERMANY
Phone: ++49 (0) 34297 1439-0
Fax: ++49 (0) 34297 1439-13
E-mail: [email protected]
Signal Concept GmbH confirms the conformity of the device according to the directives given
by the European Parliament and Council 2004/108/EC (EMC-Directive), 2006/42/EC (Ma-
chinery Directive), 2006/95/EC (Low Voltage Directive), 85/374 EEC (Product Liability Direc-
tive), 2002/95/EC (RoHS Directive) and 2002/96/EC (WEEE Directive).
Signal Concept GmbH holds a Quality Management (DIN EN ISO 9001:2008-12), which is
checked annually by Bureau Veritas Quality International Deutschland GmbH as accredited
organization.
This manual serves as an introduction to your new device. Please read it carefully for your
own protection. Furthermore, it enables you to use all functions properly. Please follow all
directions and hints to avoid accidents with persons and damages of the device.
The manual is part of the device. The user has to keep it until the disposal of the device.
When handing the device to other users, the manual must be given too.
Document No.
5006 B
Version
A
Date
17.03.2009
Author
Holm Chemnitzer
Copyright
2009, Signal Concept GmbH.
All rights reserved. All data, properties and descriptions given in this
operating manual may be changed at any time without giving notice.
Summary of Contents for SICO 5006
Page 1: ...Charger for NiCd and NiMH Cells SICO 5006 M A N U A L...
Page 2: ......