SIGMATEK SR 012 Technical Manual Download Page 7

Page: 7 / 48

S-DIAS DC MOTOR OUTPUT STAGE

SR 012

04.11.2020

Page 5

Introduction

1.1

Target Group/Purpose of this Manual

This manual contains all information required for operating the SR 012.

This manual is intended for:

•

Project planners

•

Technicians

•

Configurators/commissioning engineers

•

Machine operators

•

Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found on
our website

www.sigmatek-automation.com

Our support team is happily available to answer your questions.
For our support hotline and business hours, please visit our website.

1.2

Contents of Delivery

1x SR 012
4x opposing connector

This document can be downloaded from our website.
Additional documents may be included with delivery.

Summary of Contents for SR 012

















































Search results

Summary of Contents for SR 012

Reviews:

Related manuals for SR 012

Brands by name

Popular brands

SIGMATEK SR 012, Technical Manual

Search results

Summary of Contents for SR 012

Reviews:

Related manuals for SR 012

Brands by name

Popular brands