SE 052
S-DIAS SPLITTER ETHERNET
Page 18
02.08.2019
8
Shielding
The Ethernet wiring must be shielded.
The low-ohm shielding is either connected at the entry to the control cabinet or directly
before the SE 052 over a large surface (cable grommets, grounding clamps)!
Noise signals can therefore be prohibited from reaching the electronics and affecting the
function.
To avoid compensating currents from the PE, which flow over the shielding the conductors,
it is recommended that the system components have low Ohm and low impedance
connections to one another.
