SCP 011
S-DIAS SAFETY CPU MODULE
Page 30
28.02.2020
7
Error Response
In the event of an error, please consult the chapter "LED Displays", as important information
on the runtime status of the system can be derived from the status an error display. Since
errors in general are of a complex nature, do not perform a diagnosis based on the LEDs
alone (consult the corresponding chapter in the Safety System Handbook as well). For an
exact error analysis, the SafetyDesigner must be used.
7.1
Restart Errors
The following diagram shows the response of the Safety CPU module during restart.
Idle
Check Config.
Mode
(
Temp
.)
Op. Mode
Error
Mode
Konfiguration nicht
verteilt
RN
dauerhaft ON
Konfiguration verteilt
Wiederanlauf
E
ST
blinken
dauerhaft ON
dauerhaft ON
POST
Service
Mode
Flash
Safe-CPU
ist leer
dauerhaft ON
Restart
Flash
Safe-
Cpu is
Empty
Continously on
Continously on
Continously on
Continously on
Configuration distributed
Configuration not
distributed
blinking
