BUILD-IN TOUCH TERMINAL
ETT 412
12.03.2019
Page 7
2.3
General Safety Guidelines
Observe all on-site rules and regulations for accident prevention and occu-
pational safety.
According to EU guidelines, the operating instructions are a component of a
product.
This manual must therefore be accessible in the vicinity of the machine since
it contains important instructions.
This technical documentation should be included in the sale, rental or transfer
of the product.
Maintain this manual in readable condition and keep it accessible for refer-
ence.
Operate the unit with devices and accessories approved by SIGMATEK only.
CAUTION
In addition, the Safety Guidelines in the other sections of these instructions
must be observed. These instructions are visually emphasized by symbols.
The module complies with EN 61131-2.
In combination with a machine, the machine builder must comply with EN
60204-1 standards.
For your own safety and that of others, compliance with the environmental
conditions is essential.
To perform maintenance or repairs, disconnect the system from the power
supply.
En outre
, les consignes de sécurité mentionnées dans d’autres sections de
ce manuel doivent être respectées. Ces directives sont indiquées avec les
symboles graphiques.
Le module est conforme à la norme EN 61131-2.
En combinaison avec une machine, le constructeur de la machine doit re-
specter la norme EN 60204-1.
L’armoire de commande doit être raccordée correctement à la terre.
Pour l'entretien et les réparations, débranchez le système de l'alimentation.
