24
Sigmatek FDD Sizes 7 to 9 Power Installation Guide
3.5
Enclosure for standard drives
3.5.1 Recommended spacing between the drives
Figure 3-9 Recommended spacing between the drives
Table 3-3 Spacing required between the drives
* 50°C derating applies, refer to Table 5-3
Maximum permissible continuous output current @ 50 °C
Drive Size
Spacing (A)
40°C 50°C*
7
30 mm (1.18 in)
8
30 mm (1.18 in)
9A/E
60 mm (2.37 in)
When through-panel mounted, ideally drives should be spaced at least 45 mm (1.77 in) to
maximize panel stiffness
Enc
l
osure
A
NOTE
Summary of Contents for 074.00660
Page 1: ...Power Installation Guide SIGMATEK FDD Frame 7 to 9 Issue 12...
Page 97: ......
Page 98: ...0478 0641 12...
