Sigmann DELTA SD161BTex, Operating Instructions Manual

Page: 26 / 53

SD160BTex_BA_en_008.docx 24
10.2 Using the base charging station SDX61BT
ex
Basis (SD.119.0000.00)
and SDX61BT
ex
Basis 3
rd
(SD.11C.0000.00)
(Use the base charging station in hazardous area - System assembly 1)
The device has been closed ex-factory.
Incorrect handling may result in the termination of the operating
permit.
The cable connecting the base charging station to the power supply
is SD.Z10.0011.XX for USB, SD.Z10.0010.XX for RS232
or SR 5,5V RS232 SD.Z10.0007.XX
Insert the cable in the opening at the bottom of the base charging sta-
tion.
If the cable has been inserted fully you can hear a
"click". Check if the cable fits firmly.
Insert the plug of the connection cable into the power supply's plug
connector.
Ensure that the connection is fully secured with the
screw cap after the plug has been inserted.
Place the handheld scanner onto the charging station.
Insert the lower part of the handle to ensure that the contacts for
charging are connected properly.
The LED at the head of the scanner will come on to
indicate successful charging.