Prosight2 from Sigma Products
www.prosight2.co.uk | 1
Mounting Kit for Meyer LEOPARD
FITTING GUIDE
P/N: 0300-0004-0001 V2.2
Thank you for purchasing the Mounting Kit for fitting the Prosight2 sender
unit to a Meyer LEOPARD line array bumper. Each kit comprises two
brackets for two arrays.
Follow the simple instructions over the page to attach sender units to the
bumper and remember to reset the angle for each one on the Prosight2
Meter unit before flying the arrays.
The full procedure for operating the units and setting angles is explained in
the Prosight2 User Guide.
Kit contents
Each mounting kit comprises:
2 x LEOPARD single piece steel brackets
2 x Prosight2 safety cords
4 x M4 8mm screws
8 x M4 1mm rubber washers
8 x M6 25mm countersunk set screws
1 x LEOPARD Fitting Guide
IMPORTANT: To ensure the IP rating of the Prosight2
sender, use the rubber washers (provided) when
mounting the sender to the bracket
