SIGMA HEXA-600C User Manual
Page 9
Install FC3X-360CM to
SIGMA HEXA-600C
SIGMA HEXA-600C
Read the manual carefully before install
SIGMA FC3X-360CM Multirotor 3-Axis Carbon Fiber DSLR Gimbal
SIGMA FC3X-360CM 3-axis camera mount is specially designed for SIGMA HEXA-600C aircraft and XAircraft X650V4/V8, made by carbon fiber
material, having structure of high structural strength, light weight. It is capable of installing DSLR and most of DV. The 3-axis includes Tilt, Roll and
horizental(Pan), wherein the direction axes can rotate in unlimited 360 degrees, the rotation speed and direction are controlled by radio set.
SIGMA FC3X-360CM using a tripod and tripod-in-one design, when camera mount rotates in horizontal, the tripod is also synchronous rotation,
this way will avoid possibility that traditional camera mount will photographed the tripod while taking photos, which offers more flexible and
creative space for photography workers. Tilt axis using the dual steering gear backlash design, which could not only offer strong drive power,
but also more higher control precise. The Tilt and Roll axis both can be driven by common flight controller, such as: DJI WK-M, ACEONE or
XAircraft AHRS,etc. so as to obtail a better gyro stability augmentation effect. Other flight controllers, such as FY-30A, etc can also be
used to finish closed-loop control augmentation.
Product Technical Parameter:
Weight: 1.06kg
Outside dimensions: 310mm (W) x 244mm (D) x 278mm (H)
Camera mount innerspace size: 170mm (W) x 80mm (D) x 140mm (H)
Maximum load: 2kg (SLR camera and most DV can be installed)
