background image

Page 2 of 3  CBG-2655A 

 

AUDIO CONFIGURATIONS: 

 

The audio outputs provide a 1 kHz Tone. The connector labeled AUDIO 1 provides a continuous 1 

kHz tone. The connector labeled AUDIO 2 provides a 1 kHz tone at a 50% duty cycle operating at one 
(1) cycle per second. Equipment receiving the audio signal must be evaluated to determine if it is 
balanced or unbalanced. After this determination has been made, refer to the drawings provided in 
Figure 2 to select the proper audio configuration. Audio output impedance is 600

?

, ideally suited for a 

balanced configuration. The output level is factory set for a balanced configuration, this assumes both 
outputs are terminated into a 600

?

 load.

 

 
 
 
 
 
 
 
 
 
 
 

Balanced Out 

Unbalanced Out 

 

Audio 1 or 2 Output 

Audio 1 or 2 Output 

 

FIGURE 2 

ADJUSTMENTS: 

 

YC balance, DC offset, Video gain, and Audio level are all set for optimum performance by Sigma 

Electronics. If necessary, these parameters may be readjusted via the controls listed below. 
 

R20: ..........YC Balance. Luminance signal to Chroma signal balance. 

 

R24: ..........DC Offset adjustment. 

 

R28: ..........Video Gain. Factory adjusted for 1 Vp-p-P output 

 

R59: ..........Audio level. Optimized by factory setup for balanced configuration. 

 

SPECIFICATIONS:

 

VIDEO: 
 

OUTPUT: ................................ 

(3) EIA Split-field Color Bars with Reverse Bars, Pluge 

Signal and 100% White Signal 

 

VECTOR ACCURACY: ........... 

Within 

?

2.5

?

 and 

?

2.5 IRE, (Small Boxes on 

vectorscope graticule). 

 

TIMING: .................................. 

per RS-170A 

 

RESIDUAL SUBCARRIER: ..... 

< 1 IRE p-p 

 

OVERSHOOT: ........................ 

< 2 IRE 

 

TILT: ....................................... 

< 1 IRE line or field 

 

CONNECTORS: ..................... 

3, BNC 

AUDIO: 
 

OUTPUTS: ............................. 

1 stereo tone, balanced 

 

FREQUENCY: ........................ 

1 kHz 

?

10%, 1 channel continuous, 

 

 

1 channel pulsed 50% duty cycle, 1 sec. pulse rate 

 

LEVEL: ................................... 

0 dBm (600

?

), 

?

0.5dB 

 

IMPEDANCE: ......................... 

600

?

 

 

CONNECTORS: ..................... 

2 each, three-pin screw terminal 

Audio Out 





CBG-2155A 

Audio Out 





Open 

CBG-2155A 



?

 

Reviews: