Sigma 4-15C, Operating Manual

Page: 66 / 95

Operating Manual SIGMA 4-15C, page 66 of 95
03/06
5.1.4.3 Alteration of Existing Curves
After activation of the area
“
CURVES
”
in the configuration menu you can
analogous to the procedure discribed in 5.1.4.2 select already existing curves
and alter them.
5.1.5 Alteration of the Contrast
If you press the knob for longer than a second, a dialogue window appears. Now
you can select the contrast by turning the knob. By pressing the knob again, you
confirm the entry, the new contrast remains.
5.1.6 Imbalance Monitoring
An imbalance dialogue window indicates an excessive imbalance during
operation.
Run cannot be continued (imbalance > cut-off limit). Run is terminated with max.
deceleration.
Reason:
Improper loading or malfunction during operation (e.g. glass breakage) resulting
in an uneven run.
Note!
Additional information and a detailed description of errors and their correction is
given in chapter 9.5
“
Error correction
“
.