Laboratory Centrifuge Sigma 3-16L
Laboratory Centrifuge Sigma 3-16L IVD
8 Maintenance and service
Version 03/2014, Rev. 2.11 of 11/08/2017
• sb
49 / 79
Translation of the original operating manual, part no. 0700902
Pos : 175 /100 Sig ma/100 BA Z entrif ugen Sig ma (St andardmodul e)/080 War tung und I nst andhaltung/ 080-0010- 0030 Rot or, Bec her und Vi elfac htr äger ( auß er Basic) @ 28\ mod_1405320621063_68. doc x @ 194873 @ 3 @ 1
8.1.3
Rotors, buckets and carriers
Rotors, buckets and carriers are produced with the highest precision, in
order to withstand the permanent high stress from high gravitational fields.
Chemical reactions as well as stress-corrosion (combination of oscillating
pressure and chemical reaction) can affect or destroy the metals. Barely
detectable cracks on the surface can expand and weaken the material
without any visible signs.
• Check the material regularly (at least once a month) for
– cracks
– visible damage of the surface
– pressure marks
– signs of corrosion
– other changes.
• Check the bores of the rotors and multiple carriers.
• Replace any damaged components immediately for your own safety.
• After every cleaning process, grease the rotor tie-down screw slightly
with a small amount of heavy-duty grease for load-bearing bolts (part
no. 71401) and distribute the grease with a cloth so that it forms a thin
layer.
Pos : 176 /010 Uni vers almodul e/ Leerz eile @ 0\ mod_1202116244500_0.doc x @ 114 @ @ 1
Pos : 177 /100 Sig ma/100 BA Z entrif ugen Sig ma (St andardmodul e)/080 War tung und I nst andhaltung/ 080-0010- 0040 Tragbolz en (außer 2-6, 2-6E, 2-16P, 2-16KL) @ 28\ mod_1405320624792_68.doc x @ 194915 @ 3 @ 1
8.1.4
Load bearing bolts
Only greased load bearing bolts ensure the even swinging of the buckets
and, therefore, the quiet run of the centrifuge. Non-greased bolts can lead
to a system shut-down due to imbalances.
After every cleaning process, grease the load-bearing bolts of the rotor
slightly with a small amount of heavy-duty grease for load-bearing bolts
(part no. 71401) and distribute the grease with a cloth so that it forms a thin
layer.
Pos : 178 /010 Uni vers almodul e/ Seit enwechs el @ 0\ mod_1202116244312_0.doc x @ 105 @ @ 1