Sigma 18.30.171 User Manual Download

Page: 1 / 9

American Faucet & Coatings Corporation

Sigmatherm

INSTALLATION INSTRUCTIONS

Thermostatic Mixing Valve

3/4" Valve with Dual Exits and Integral Stops

Part # 18.30.171

Installation

Please Note: The valve is shipped with a temporary construction cover (14). The combination cover cartridge

(3), has been packaged separately from the valve body to prevent clogging the cartridge during installation.

Install the combination cover cartridge (3)

tional. The water heater must be working or the unit will not work.

Please remember the cartridge should be removed and cleaned annually for optimum useful life of the system.

Cover Page 1 of 10

The 3/4" Rough Valve is Dual Exit Ready

valve

Cover Screw

Screw Seal O-Ring

Part # 18.30.149

Black Plastic Housing

Part # 18.30.092

3” Square Tube

Part # 18.30.085

Bushing

Part # 18.12.016

Metal Pointer

Assembly

16pt- 18.12.036

20pt- 18.12.091

Sigma Escutcheon

Part # 18.12.019

Handle Varies

Metal Dial

Cover Plate 9-1/2"

Part # 18.12.010

2-1/2” Threaded Tube

Note: Never Cut Inside

Thread End

Part # 18.30.086

Combination Cover

Cartridge

Part #18.30.147

Body

Other Parts

3/4" Reverse Cartridge Part # 18.30.161

Cover Seal O-Ring Only Part #18.30.091

Extension Available (If required)

4-1/2” Threaded Tube Part #18.30.088

5” Square Tube Part #18.30.087

Revised 7-12-19

FORM SIG 063

Temporary

Construction Cover

Part # 18.30.172

Listed ASSE 1016-2005 T-80 3/4" T

Summary of Contents for 18.30.171










Search results

Summary of Contents for 18.30.171

Reviews:

Related manuals for 18.30.171

Brands by name

Popular brands

Sigma 18.30.171, Installation Instructions Manual

Search results

Summary of Contents for 18.30.171

Reviews:

Related manuals for 18.30.171

Brands by name

Popular brands