Blood bank centrifuge Sigma 8KBS
5 Set-up and connection
32 / 125
Version 05/2021, Rev. 1.2 of 28/04/2022
• sb
Translation of the original operating manual, part no. 0703502
5.2
Cover holder
The cover of the swing-out rotor 11805 with a windshield can be placed in
the lid of the centrifuge when loading or unloading the centrifuge. In
addition, it is possible to install a cover holder on the right side of the
centrifuge. The required accessories are included in the scope of supply:
1
Holder for the rotor
cover
2
Hexagon socket head
screw (M6x16)
Fig. 9: Cover holder accessories
Installation
There is a hole for the cover holder in the middle of the upper edge on the
right-hand side of the centrifuge.
• Insert the hexagon socket head screw through the hole of the cover
holder and fasten the cover holder to the hole on the right-hand side of
the centrifuge by way of the hexagon socket key (included in the scope
of supply).
3
Holder in the
centrifuge lid
4
External holder
Fig. 10: Storage options for the windshield cover
