![background image](http://html1.mh-extra.com/html/sigma/146774/146774_operating-manual_1267883017.webp)
Refrigerated Centrifuge with Heating System Sigma 3-30KHS
3 Safety
Version 09/2014, Rev. 1.15 of 08/05/2020
• sb
17 / 91
Translation of the original operating manual, part no. 0701402
Pos : 37 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030-0030 Ver antw ort ung des Betrei bers @ 26\mod_1405319015364_68. docx @ 191961 @ 2 @ 1
→
3.3
Responsibility of the operator
The operator is responsible for authorising only qualified personnel to work
on the centrifuge (see chapter 3.4 - "Operating personnel").
The areas of responsibility of the personnel concerning the operation,
maintenance, and care of the unit must be clearly defined.
The safety-conscious work of the personnel in compliance with the
operating manual and the relevant EC and national health and safety
regulations as well as with the accident prevention regulations must be
checked at regular intervals (e.g. every month).
Under the international rules for health and safety at work, the operator is
obliged to:
• take measures in order to prevent all danger to life or health during
work.
• ensure that centrifuges are operated properly and entirely as intended
(see chapter 1.2 - "Intended use").
• take protective measures against fire and explosion when working with
hazardous substances.
• take measures for the safe opening of centrifuges.
The operator must perform a risk assessment concerning potential
accidents in connection with the centrifuge and take design-related
countermeasures, if necessary.
The centrifuge has to be maintained regularly (see chapter 8 -
"Maintenance and service").
Components that are not in a perfect state must be replaced immediately.
Pos : 38 / 010 U nivers almodule/ Leerz eile @ 0\m od_1202116244500_0. doc x @ 114 @ @ 1
Pos : 39 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030-0040 Bedienpers onal @ 26\m od_1405319017634_68.docx @ 191989 @ 2 @ 1
→
3.4
Operating personnel
Persons operating the unit must
• be familiar with the fundamental regulations concerning workplace
safety and accident prevention
• have read and understood this operating manual (and in particular the
safety sections and warning notes) and confirmed this with their
signature.
Pos : 40 / 010 U nivers almodule/ Leerz eile @ 0\m od_1202116244500_0. doc x @ 114 @ @ 1
Pos : 41 / 100 Sigma/ 100 BA Zentrif ugen Sigma (Standar dmodule)/ 030 Sic her heit /030-0050 I nf ormelle Sic herheits hinw eise @ 26\m od_1405319019966_68. docx @ 192017 @ 2 @ 1
→
3.5
Informal safety instructions
• This operating manual is a part of the product.
• The operating manual must be kept at the location of use of the
centrifuge. Ensure that it is accessible at all times.
• The operating manual must be handed over to any subsequent owner
or operator of the centrifuge.
• Any changes, additions or updates received must be added to the
operating manual.
• In addition to the operating manual, the general and local rules and
regulations concerning the prevention of accidents and the protection of
the environment must also be supplied.
• Safety and danger indications on the centrifuge must be kept readable
at all times. If necessary, they must be replaced.
Pos : 42 / 010 U nivers almodule/ Seitenw ec hsel @ 0\m od_1202116244312_0. doc x @ 105 @ @ 1