10
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not
in use to avoid wasting power. The charger should remain close to the electric
socket and easily accessible while charging.
Installing a SIM-card and SD card
Unscrew the screws
and remove the battery
compartment cover.
Remove the battery
Insert SIM-card with
contacts facing down.
Insert microSD card
Insert the battery, close
the cover and tighten the screws
carefully.
Attention!
Do not insert the memory card in slot
for the SIM-card.
If the memory card stuck in the
slot for SIM-card, take the device to service
center Sigma mobile for its safe removal. Be
careful not to lose the SIM-card and do not let
others use it. Sigma mobile is not
liable for any
damages or inconvenience caused by lost or
stolen cards.
Close cover of the
SIM/microSD card
Installing a memory card
Your device accepts memory cards
with maximum capacities of 32 GB.
Depending on the memory card
manufacturer and type, some memory cards may not be compatible with your
device.
