UZB3 Z-Wave USB Adapter
1
1
All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be
edited, copied or circulated without prior written agreement by Sigma Designs.
© 2014 Sigma Designs, Inc.
The Node’s
Menu Bar
has the following items:
Menu item
Description
NW Inclusion
Network Wide Inclusion, to include all nodes into
network once they have been reset and given power
Add
To Add a node
Remove
To Remove a node
Node Info
To request Node info from a node
Request Node Neighbor Update
To get the neighbors from the specified node.
Set SUC/SIS
To set the “Set SUC” or “Set SIS” command to the
selected Controller
Basic Set On
Send the BASIC SET ON command to Switch a selected
node(s) ON
Toggle Basic Get
Starts/stops sending consequent BASIC GET commands
to the selected node(s)
Basic Set Off
Sends the BASIC SET OFF command to Switch a selected
node(s) OFF
Switch All On
To switch all nodes in the network ON
Switch All Off
To switch all nodes in the network OFF
Send NOP
‘No Operation’ – to send a frame not carrying any
functional info to a node
Numeric box after NOP
To enter the Node ID of the node to which a NOP frame
is to be sent
Is Failed
To send a Failure signal to a node
Replace failed
To Replace a failed node
Remove Failed
To Remove a failed node
Wake Up Interval (Set)
To set up the Wake Up Interval for a non-listening node
