SIG
L
ENT
SVA1000X User Manual 73
3.3.1.1
Select Trace
The same function as in
Trace
->
“Select Trace”, please refer to section 3.2.2.1.
3.3.1.2
Select Marker
Select one of the four markers. The default is Marker1. When a marker is selected, you can set its type,
trace to be marked and other related parameters. The enabled marker will appear on the trace selected
through the
Select Trace
option and the readouts of this marker are also displayed in the active
function area and at the upper right corner of the screen.
The current active marker is a filling diamond mark, while the non-active marker is an unfilled
diamond mark. On the left side of the current active marker in the upper right corner of the screen,
the ">" sign appears.
When marker R is opened, whether it is currently active or not, the upper right corner of the screen
will display its reading.
Figure 3-2 Marker
3.3.1.3
Normal
The same function as in
Marker
->
“Normal” in Spectrum Analyzer Mode, please refer to section
3.3.1.4
Delta
The same function as in
Marker
-
> “Delta” in Spectrum Analyzer Mode, please refer to section 2.3.1.4.