98 SSG5000A Programming Guide
Sensor State (:SENSe[:POWer]:STATus)
Command Format
:SENSe[:POWer]:STATus OFF|ON|0|1
:SENSe[:POWer]:STATus?
Instruction
Set the sensor state
Get the sensor state
Parameter Type
Boolean
Parameter Range
OFF|ON|0|1
Return
Boolean
Default
0
Menu
SENSOR > Sensor State
Example
SENSe:STATus ON
SENSe:STATus?
Measurement (:SENSe[:POWer]:VALue?)
Command Format
:SENSe[:POWer]:VALue?
Instruction
Indicate the current reading of the sensor
Parameter Type
None
Parameter Range
None
Return
Float, unit: dBm
Default
None
Menu
SENSOR > Measurement
Example
SENSe:VALue?
Statistics State (:SENSe[:POWer]:STATIStics:STATe)
Command Format
:SENSe[:POWer]:STATIStics:STATe ON|OFF|1|0
:SENSe[:POWer]:STATIStics:STATe?
Instruction
Set statistical status of power meter readings
Get statistical status of power meter readings
Summary of Contents for SSG5080A Series
Page 1: ...SSG5080A Series Signal Generator Programming Guide PG0805A E01A ...
Page 2: ......
Page 124: ...122 SSG5000A Programming Guide ...
Page 136: ......