![SIGLENT TECHNOLOGIES SAP1000 User Manual Download Page 4](http://html1.mh-extra.com/html/siglent-technologies/sap1000/sap1000_user-manual_1267512004.webp)
2
SAP1000/SAP2500 Active Probe User Manual
1 Safety Instructions
Carefully read the following safety precautions to avoid person injury and
prevent damage to the instrument and any products connected to it. To avoid
potential hazards, please use the instrument as specified.
This section contains instructions that must be observed to keep this
oscilloscope accessory operating in a correct and safe condition. You are
required to follow generally accepted safety procedures in addition to the
precautions specified in this section. The overall safety of any system
incorporating this accessory is the responsibility of the assembler of the
system.
Connect and disconnect properly.
Connect probe to the measurement
instrument before connecting the test leads to a circuit/signal being tested.
Use only within operational environment listed.
Do not use in wet or
explosive atmospheres.
Ground the product.
This product is indirectly grounded through the
grounding conductor of the mainframe power cord. To avoid electric shock, the
grounding conductor must be connected to earth ground. Before making
connections to the input or output terminals of the product, ensure that the
product is properly grounded.
Use indoors only.
Keep product surfaces clean and dry.
Be careful with sharp tips
. The tips may cause bodily injury if not handled
properly.
Summary of Contents for SAP1000
Page 1: ...SAP1000 SAP2500 Active Probe User Manual EN01A...
Page 2: ......