EAN-4000-OEM-MIPI-Cameras
© SightLine Applications, Inc.
3
4.1
Acquisition Settings
From the main menu in Panel Plus go to
Configure
»
Acquisition Settings
. If available, use the
Auto Fill
drop down menu in the
Acquisition Settings
dialog to automatically populate the relevant fields with
the correct settings. The settings can also be manually entered as shown in
Table 1
.
For information
about Acquisition fields in Panel Plus see
EAN-Digital Video Configuration
IMPORTANT:
Save parameters and reset the board when changing parameters. Cycle system
power when changing resolution.
If video does not display, try saving and activating the settings again. Check the encoding settings
on the Compression tab and review the network addresses for the destination video.
Table 1: 4000-OEM Panel Plus Basic Acquisition Settings
Digital Cameras
Camera Index = Cam 0
Camera Type = Generic Digital
Acquisition Settings
Auto Fill
Height Width VFP HFP
Bits Input
Invert VSync Invert HSync
Sync/Crop
Init Code
Flags
Vision Components
VC-MIPI OV9281
Mono
Vision Components
OV9281 Mono
800
1280
0
0
10
Gray
None
None
None
None
0x0
Configuration notes:
Requires software version 3.01.xx and above. Enter flag <mipi=ov9281> in the Options field.
VC-MIPI IMX296
Mono
Vision Components
IMX296 Mono
1080
1440
0
0
10
Gray
None
None
None
None
0x0
Configuration notes:
Requires software version 3.01.xx and above. Enter flag <mipi=imx296> in the Options field.
VC-MIPI IMX412
Color
Vision Components
IMX412 Color
2160
3840
0
0
10
Bayer
None
None
None
None
0x3
Configuration notes:
Requires software version 3.01.xx and above. Enter flag <mipi=imx412> in the Options field.
5
Vision Components VC-MIPI-IMX412 Camera
The IMX412 camera is a 4056 wide by 3040 high 10-bit Bayer imager that can use two or four MIPI data
lanes (
Figure 2
). The
Auto Fill
option is only for two MIPI data lanes.
Supported display resolutions are full 4K (3840x2160), 1080p, and 720p. Big snapshot supported
resolutions are 4056x3040, 4k, 1080p, and 720p.
Software 3.01, and higher, have a higher frame rate than software version 3.00, per improvements.
5.1
Hardware Connection
The VC-MIPI-IMX412 connects to the 4000-OEM J9 connector by using the components in the SLA-KIT-
4000-MIPI-CAM:
•
SLA-CAB-MIPI-02
FFC Cable
•
SLA-4000-PI22 ribbon interface board. Converts 30 pin OEM interface to 22 pin camera interface.
•
The camera to SLA-4000-PI22 ribbon cable must be purchased with the camera from Vision
Components.
