Sight mark SM11030KSM11031KSM11032K, User Manual

Page: 6 / 13

ADJUSTING THE EYECUP
Prior to using the Solitude spotting scopes, it is best to adjust the twist up eyecup to your preference. The
twist-up eyecups allow you to properly observe the full field of view of the image without any vignette effect
or darkened edges. Even if you wear eyeglasses you can use the Solitude spotting scopes effectively. If you
wear glasses, keep the eyecup in the down position. Twist the eyecup to the up position if you do not wear
glasses. To twist the eye cups:
1. Rotate the eye cup (2) counter-clockwise to raise the eyecup.
2. Rotate the eye cup clockwise to lower the eyecup.
8 9
USING THE ALIGNMENT SIGHT
All Solitude spotting scopes are equipped with a built-in alignment sight. The built-in alignment sight
allows the spotting scope’s field of view to be quickly aligned with the target. This prevents wasting
time trying to find your target while looking through the high magnification of the spotting scope. It
is similar to using iron sight on a rifle or pistol. To use the alignment sight:
1. First, locate the alignment sight (4) on the top of the unit.
2. Aim the spotting scope at the target intended to be viewed. Align the target between the “V” of the
alignment sight.
3. Next, view the target through the spotting scope at the lowest magnification. The target should be
within the spotting scope’s field of view.
4. Finally, make any necessary focus, magnification or alignment adjustments to the spotting scope in
order to better align the target within the field of view.