6
Selecting speech mode
On start-up the calculator is set to display mode. To select
speech mode press
[2
nd
]
followed by
The calculator will now speak all keystrokes and the results
on the display. The volume can be controlled by pressing
the up and down arrow buttons to the right of the display.
The calculator will read the display at any time by pressing
as long as it is
in speech mode.
To reset to display mode press
[2
nd
]
or turn the calculator OFF and then ON
y
y
y
7
The Display
A maximum of eight digits can be shown on the display. Any
additional digits entered will be ignored.
The calculator display has been manufactured to provide the
highest contrast for viewing in normal room lighting. To
obtain the best clarity it should be viewed at a slight angle.
The display also provides status indicators as described in
the following table.
