The device does not collect data from the Logger
The firmware is probably corrupted, do a firmware update or a reset through the Portwest GPS Locator V1 Application.
My device has an abnormally low battery life or sends data even if it is not moving.
1) Check sensitivity parameters and adjust it to the least sensitive setting.
2) Check logger parameters (GPS intervals).
LED codes
Power On:
Press button
8 seconds
Power Off:
Press button 5 sec
8 seconds
Send message 1:
Press button once
blink x1 and
on during Sigfox® transmission (2 to 6 seconds)
Send message 2:
Press button twice
blink x2 and
on during Sigfox® transmission (2 to 6 seconds)
Send Alert message:
Press button 3 times
toggle and
on during Sigfox® transmission (2 to 6 seconds)
Send message 4:
Press button 4 times
blink x4 and
on during Sigfox® transmission (2 to 6 seconds)
Send message 5:
Press button for 2 seconds
on for 1 second and
on during Sigfox® transmission (2 to 6
seconds)
Hard reset:
Press button for 15 seconds
8 seconds
GPS fix success
blink x1
GPS fix failure
blink x1
Alert message received (acknowledgement)
blink x20
Alert message or acknowledgement failed
blink x20
Low battery
blink x2 per minute when device is in motion
Disclaimer
General Conditions of Use
Read carefully before using the Portwest GPS Locator V1 device. By using the Portwest GPS Locator V1, you certify that you have read
all the instructions and General Conditions of Use that are considered as accepted by the user
Disclaimer on safety and Portwest GPS Locator V1
Portwest cannot be held liable or responsible for any consequences of the use of a Portwest GPS Locator V1 device particularly if an
accident or an emergency situation has not been detected by the device. Portwest GPS Locator V1 is not as safety device and is not
certified by any security or safety organization. You are using Portwest GPS Locator V1 under your full responsibility and at your own
risk.
Live GPS tracking and alerting only works under Sigfox® coverage Zone 1. More information about the Sigfox® coverage Zone 1 is
available on the Sigfox® website, always ensure your region is covered before use by checking the Sigfox® network coverage here
http://www.sigfox.com/coverage
. Contact Portwest at [email protected] in case of any doubt about coverage.
Sigfox® message send\receive as well as GPS signal acquisition strongly depend on the conditions of use and the environment.
Portwest does not guarantee the performance of signal reception.
