Sierra Thermostat griddle
----------------------------------------------------------------------------------------------------------------------------------------------------------------
OPERATOR’S MANUAL
Page
11
LEVELING
griddle must be level (side-to-side and front-to-back) during operation to ensure proper
performance. Improper leveling can result in uneven temperature distribution, cold spots, and
possibly damaged components.
1
Place a level on the griddle.
2
Adjust legs by turning the bullet feet at the bottom of each leg. Using pliers or a crescent
wrench, turn the feet counter-clockwise to increase height, and clockwise to decrease height until
leveling is achieved. Do not extend the legs more than 1-
¾”.
PILOT ADJUSTMENT
Using a flathead screwdriver, turn the slotted hex-head pilot adjustment screw clockwise to
decrease the flame, and counterclockwise to increase the flame.
SHUTDOWN OF GRIDDLE
1. Turn thermostats to the OFF position to cut off burners.
2. The pilots will remain lit and monitored by the safety valve as long as the main gas supply is on.
EXTENDED SHUTDOWN
1. Shut off the main gas supply valve.
2. Apply a heavy coat of vegetable oil over the griddle plate to inhibit rust.
MAINTENANCE
The griddle and its parts are hot. Use care when operating, cleaning or
servicing the griddle.
LUBRICATION
There are no parts on this griddle that require lubrication.
VENT
Daily, when the griddle is cool, check the flue and clear any obstructions.
SERVICE AND PARTS INFORMATION
Contact the Service Agency in your area to obtain service and parts information. For a complete
listing of Service and Parts depots refer to or
http://mvpgroupcorp.com
When calling for service, the following information should be available from the appliance
identification plate: Model Number, Serial Number and Gas Type.
