TWEETER INSTALLATION
the hex bolt and pronged spring retainer to secure the
SURFACE MOUNT :
Use the surface mount option when,
cutting a hole in the door panel, or other mounting surface is
not possible.Make sure that the surface mount location is free
of passenger movement that might damage the tweeter. Use
the kit screws supplied to secure the mount to the surface
ANGLE MOUNT:
This other surface mount type of housing
is a two piece unit that opens just like the flush mount part.
It should be used when a surface angle directs the tweeter
axis away from the listener. This can be useful in dashboard
and kick panel mounting situations.
SIERRA TWEETER PLACEMENT
For the best results always try to maintain equal path lengths between the right and left
tweeters and the listening position.This can usually be accomplished by mounting as low
and deep as possible,in a kick panel installation,or high and deep in a dashboard
installation.Be cautious in dashboard installations not to reflect the tweeter off of the
windshield. This increases reflections and greatly diminishes the overall performance of
the tweeter. The angle mount housing can help to point the tweeter at the listener.
For door panel installations try to angle the tweeter toward the listener to minimize cross
cancellation.
The Sierra Component series features several types of unique mounting options.
IMPEDANCE
FREQUENCY
housing to the mounting surface.
The tweeter is easy to install in any vehicle. Each Sierra component set comes
with a flush mount,surface mount, and angle mount hardware kit. For other
custom. mounting configurations contact your Sierra Dealer
S P E C I F I C AT I O N S
MODEL NO.
RMS
160
200
(OHMS)
RESPONSE
4
91dB/1M/1W
92dB/1M/1W
4
4
50
ㅡ
20,000Hz
SRP62
SRP693
80
100
POWER
MAX
POWER
SENSITIVTY
(DB)
SRP54
60
120
90dB/1M/1W
50
ㅡ
20,000Hz
FLUSH MOUNT:
For optimal tweeter installation,use the flush
mount option.The flush mount requires a 7/8" depth and XX
2 1/8" mounting hole in the mounting surface.The flush
mount tweeter housing is a two piece design that twists
counter clockwise for opening,to insert the tweeter driver. A
clockwise twist will lock the housing assembly together. Use
60
ㅡ
20,000Hz
