48
Notes:
1. Because the value is right-aligned, it is possible that depending on the actual flow you can
see a change in the number of digits behind the decimal point. For example if the flow is
changing from 2 to 2.01 and then 2.1 you can see: 2.0, 2.01 and 2.1 on the display.
2. If the maximum number of digits is exceeded you see out of range on the display. In that
case select another unit (see chapter
).
3. The step size in auto mode between each reading is depending on the range but it is
always well within the accuracy of the flow meter. For other setting mentioned below, this
does not have to be the case.
The other settings are the minimum step that the value will take between values.
Example: If you have a flow of 189.673 mln/min than the unit will show 189.6 in auto mode. When
selecting the other settings you would see:
Resolution setting
Flow
Displayed Remarks
0.0001
189.673
189.673
The display cannot show more than 6 digits
0.001
189.673
0.01
189.67
0.1
189.6
auto
189.6
1
189
10
180
100
100
1000
0.0
10000
0.0
4.12.6
Security
To avoid the unauthorized changing of settings in the menu, it is
possible to protect the menu with a self-defined password. If you
enable this option you first have to enter a 4-digit numeric password to
gain access to the menus. In this setting you can also define that
password. You can only activate the password after you have defined
your own
personal password under “Set password”
If you forget or lose your password, please contact the factory at:
Note
The numbers are not rounded off, but they are made invisible (also called a floor
function). The totalizer and the bar graph will not be effected by this setting and will
also work based on the real high resolution flow.
Enable password
Set password
□
123_