Sierra Wireless Raven XT, Quick Start Manual, Page: 18 / 24

Rev 3.0E Jul.09 18
go off after the light pattern stops), the ALEOS configu ‐
ration settings will return to the factory defaults.
Light Patterns
The LEDs on the front of the modem will respond in different
patterns to indicate modem states.
• Normal ‐ Each LED, mentioned above, is lit as applicable.
• Start up ‐ The LEDs will cycle from left to right.
• PassThru mode ‐ Network and Signal LEDs will blink in
tandem. The Activity LED will blink when transmitting or
receiving data.
• SOS ‐ The Network LED blinks.
• Configuration Reset ‐ The LEDs will cycle left to right and
then right to left 4 times.
• Authentication Failure ‐ The Network, Signal, and
Activity LEDs blink every 2 seconds.
• Data Retry ‐ The Network, Signal, and Activity LEDs blink
every 3 seconds.
Caution: If you reset the modem configuration using the reset button,
you may need to reactivate your Raven XT with Sprint.