©2018 Sierra Wireless, Inc. Omnilink is a registered trademark of Sierra Wireless, Inc.
OM500 Strap
The OM500 strap is a hypoallergenic design made from TEXIN 245. The OM500 strap has imbedded
fiberoptic lines to detect removal attempts. The OM500 strap is the same strap design used from the
OM200, OM210, and OM400 with thousands of successful use cases and no substantiated complaints.
The OM500 strap will connect to the device using two screws similar to the connection used for the
OM200.
Locking Pins
The plastic locking pins used to secure the OM500 tracking device to the strap and backplate are similar
designs to the locking pins used in the Om200, OM210, and OM400 offender tracking devices. The
locking pins are one time use disposable products. The locking pins feature tamper evident designs.
The Omnilink locking pins are key to the no tool instillation process.
Ch
arging The OM500
Before you install and use the OM500 device it will be necessary to charge the battery:
Step 1:
Plug the Om500 charger into a working wall outlet (120 volts).
Step 2:
Pull the plastic charger port cover down on the OM500 to reveal the charger port.
Step 3
: Connect the round magnetic connector to the charger port on the front of the OM500.
Step 4
: If programed to do so the device will provide an audio alert that the device is now
charging.
Step 5
: Charge the device for a minimum of 60 minutes or as directed by your agency
Step 6
: Unplug the magnetic charger and replace the plastic charger port cover. If programed
the device will provide and audio alert that the device has stopped charging.
