Sierra Wireless MP 700 Series, Command Reference Manual

Page: 78 / 118

MP 700 Series GPS AT Command Reference
76 2130309
+CLIR (continued) Calling line identification restriction (continued)
Note: CLIR can only be invoked and suppressed if subscription to the service
allows for it.
+CLIR?
returns the current setting and CLIR network status:
+CLIR:0,0
CLIR default, CLIR not provisioned on network
+CLIR:0,1
CLIR default, CLIR provisioned (permanent mode)
+CLIR:0,2
CLIR default, CLIR network status unknown
+CLIR:0,3
CLIR default, CLIR presentation restricted (temporary)
+CLIR:0,4
CLIR default, CLIR presentation allowed (temporary)
+CLIR:1,0
CLIR invoked, CLIR not provisioned on network
+CLIR:1,1
CLIR invoked, CLIR provisioned (permanent mode)
+CLIR:1,2
CLIR invoked, CLIR network status unknown
+CLIR:1,3
CLIR invoked, CLIR presentation restricted (temp)
+CLIR:1,4
CLIR invoked, CLIR presentation allowed (temp)
+CLIR:2,0
CLIR suppressed, CLIR not provisioned on network
+CLIR:2,1
CLIR suppressed, CLIR provisioned (permanent)
+CLIR:2,2
CLIR suppressed, CLIR network status unknown
+CLIR:2,3
CLIR suppressed, CLIR presentation restricted (temp)
+CLIR:2,4
CLIR suppressed, CLIR presentation allowed (temp)
+CMEE=<n>
+CMEE?
Report mobile equipment error
Sets whether the modem reports errors as simply
ERROR
, or with details in the
form
+CME ERROR: <err>
(either numeric or verbose).
Note: Regardless of how this is set, an ERROR is returned in certain cases
(such as if the wrong syntax or an invalid parameter is used).
Supported values
<n>
can be set to one of three values:
•
<n>=0:
Do not report detailed errors, simply return
ERROR.
•
<n>=1:
Enable
+CME ERROR: <err>
result codes and use numeric values
for
<err>
.
•
<n>=2:
Enable
+CME ERROR: <err>
result codes and use verbose
(English) values for
<err>
.
Numeric and verbose values for
<err>
appear on page 106.
+CMEE?
returns the current setting.
Table 3-9: Command Reference Table (ASCII Alphabetic)
Command Description