Sierra Wireless mangOH, User Manual, Page: 7 / 32

Rev 1 Jun.15 Proprietary and Confidential - Contents subject to change 7
1
1: Introduction
This user guide explains how to set up and begin using Sierra Wireless’ mangOH
Development Board with the following CF3 form factor modules:
• WP85 Series (Primary)
• WP75 Series (Primary)
• HL 75 Series (Primary / Secondary)
• HL 65 Series (Primary / Secondary)
The mangOH Development Board will also be used for forthcoming CF3 form
factor modules.
Equipment
Table 1-1 details the required and optional components needed to begin using the
mangOH Development Board in your development environment.
Table 1-1: Required / Optional Equipment
Item Included
in Dev Kit
Details
mangOH
Development
Board
Yes The mangOH Development Board supports the
modules listed above.
Sierra Wireless
CF3 form factor
‘Smart‘module
Yes WP8548-G included.
Drivers,
Terminal
emulation
software
No Driver delivery method TBD
Power supply No
•
Output voltage: 5V to 15V
•
10 W or higher
Note: DC power is required to make and establish a
full-speed mobile network connection.