Sierra Wireless AirPrime, User Manual, Page: 11 / 44

Operation
Rev 5.0 Apr.20 11 41111068
• Serial Port : specifies the serial port and baud rate of the computer to output
the RTCM data to the GPS module.
After the set up is complete, click the RTCM button to start. You can observe the
screens marked by red rectangles as shown in Figure 2 - 7 to understand the
result.
Click the RTCM button again to disconnect streaming.
Figure 2 - 7: Fixed Quality after RTCM is Enabled
You can also launch a command prompt and input the "netstat —a" command to
monitor the status of a network connection as show in Figure 2 - 8 . If the
connection is successful, the caster name and port number will be listed.
Figure 2 - 8: Status of a Network Connection