Development Kit User Guide
Rev 1.2 Nov.18
16
41112817
5.
Left click
Device Manager
and select
Ports (COM &LPT)
. Check to see if a
device named
Silicon Labs CP210x USB to UART Bridge (COM#)
is
present. If so, the Development Kit is set up and ready for use.
Figure 4-4: Accessing the Port Properties
“COM9” represents the virtual COM port number generated for the USB
connection to the Development Kit. This generated COM port value must match
the COM port value in the program setting for the application to establish proper
communication with the Development Kit.
After completing the installation, please proceed to
Using GNSS Tool
Microsoft Framework 4.5 or higher is required before you launch the GNSS Tool
software on your PC.
Double click
GNSSTool.exe
to start the application, the main screen of the
program is shown below:
