AirPrime WP8548 / WP75xx / WP76xx / WP77xx AT Command Reference
166
Proprietary and Confidential - Contents subject to change
4118047
!DAFTMACT
Put modem into Factory Test Mode
Place the modem in FTM (Factory Test Mode). FTM is a non-signaling mode that allows
the radio component to be manually configured to conduct certain types of tests.
The modem must be in FTM mode to use the test commands described in this chapter
(except for commands that start with “!DACGPS”
Note: When this command executes successfully, the modem responds with the value
290300. Any other response indicates an error.
Password required:
Yes (see
for details)
Usage:
•
Query:
AT!DAFTMACT
Response:
290300
(Success. Any other response indicates an error.)
OK
Purpose:
Place modem in FTM mode (from online mode)
!DAFTMDEACT
Put modem into Online Mode from Factory Test Mode
Take the modem out of FTM and put it back into online mode. (
puts the
modem into FTM.)
Note: When this command executes successfully, the modem responds with the value
290400. Any other response indicates an error.
Password required:
Yes (see
for details)
Usage:
•
Query:
AT!DAFTMDEACT
Response:
290400
(Success. Any other response indicates an error.)
OK
Purpose:
Place modem in online mode (from FTM mode).
Table 6-2: Test Command Details (Continued)
Command
Description
