Rev 002
55
WMP Development Kit User Guide
Startup Procedure
2. Verify that:
The
“ON/OFF” switch is
set to the “ON” position.
The
“BOOT” switch is set
to the
“OFF” position.
3. Verify that:
The UART2 enable switch is set to the
“ON” position.
All specials solders are soldered. (See § 5.2 for more information.)
4. Connect the RS232 cable provided
with the Development Kit, between the
PC port and
J100
of the
board.
Note:
Baud rate by default is 115.2 kbps, 8N1.
