Sierra Wireless AirPrime SL808 Series Product Technical Specification & Customer Design Manuallines Download Page 4

Page: 4 / 122

Product Technical Specification & Customer Design Guidelines

Proprietary and Confidential - Specifications subject to change

2400058

Patents

This product may contain technology developed by or for Sierra Wireless Inc.

This product includes technology licensed from QUALCOMM

3G.

This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under
one or more patents licensed from InterDigital Group.

Copyright

Trademarks

AirCard

and Watcher

are registered trademarks of Sierra Wireless. Sierra

Wireless



, AirPrime



and the Sierra Wireless logo are trademarks of Sierra

Wireless.

Windows

and Windows Vista

are registered trademarks of Microsoft

Corporation.

QUALCOMM

is a registered trademark of QUALCOMM Incorporated. Used

under license.

Other trademarks are the property of their respective owners.

Contact
Information

Consult our website for up-to-date product descriptions, documentation,
application notes, firmware upgrades, troubleshooting tips, and press releases:

www.sierrawireless.com

Revision
History

Sales Desk:

Phone:

1-604-232-1488

Hours:

8:00

to 5:00

Pacific Time

E-mail:

[email protected]

Post:

Sierra Wireless

13811 Wireless Way

Richmond, BC

Canada V6V 3A4

Fax:

1-604-231-1109

Web:

www.sierrawireless.com

Revision
number

Release date

Changes

December 2010

Created document

Summary of Contents for AirPrime SL808 Series



























































































































Search results

Summary of Contents for AirPrime SL808 Series

Reviews:

Sierra Wireless AirPrime SL808 Series, Product Technical Specification & Customer Design Manuallines, Page: 4 / 122

Search results

Summary of Contents for AirPrime SL808 Series

Reviews: