![Sierra Wireless AirPrime EM7355 Hardware Integration Manual Download Page 7](http://html1.mh-extra.com/html/sierra-wireless/airprime-em7355/airprime-em7355_hardware-integration-manual_1266740007.webp)
Rev 2 Feb.13
Proprietary and Confidential - Contents subject to change
7
1
1: Introduction
The Sierra Wireless EM7355 Embedded Module is an M.2 modem
that provides LTE, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA,
GSM, GPRS, EDGE, CDMA, and GNSS connectivity for notebook,
ultrabook, and tablet computers over several radio frequency bands.
The device also supports 2G / 3G roaming.
Accessories
A hardware development kit is available for AirPrime M.2 modules.
The kit contains hardware components for evaluating and developing
with the module, including:
•
Development board
•
Cables
•
Antennas
•
Other accessories
For over-the-air LTE testing, ensure that suitable antennas are used.
Required connectors
describes the connectors used to integrate the EM7355
Embedded Module into your host device.
Table 1-1: Required host-module connectors
Connector type
Description
RF cables
•
Mate with M.2-spec connectors
•
Three connector jacks
EDGE (67 pin)
•
Slot B compatible — Per the M.2 standard (
PCI Express NGFF
(M.2) Electromechanical Specification Revision 0.7
), a generic
75 pin position EDGE connector on the motherboard uses a
mechanical key to mate with the 67 pin notched module
connector.
•
Manufacturers include LOTES (part #APCI0018-P001A01),
Kyocera, JAE, Tyco, and Longwell.
•
Industry-standard connector.