Sierra Wireless AirLink MP, User Manual

Page: 44 / 63

AirLink MP User Guide
38 2130795
Status indicators
The MP modem’s indicator panel includes four indicator lights.:
Figure 4-1: The indicator panel of the MP modem.
The following table shows the behavior of the LEDs during normal MP modem
operation:
Reset the MP modem
The reset button for the MP modem is on the top of the housing.
To reset the MP modem, press the button until all four
indicator lights illuminate. (Do not use sharp implements
that might puncture the rubber.)
Resetting the MP modem is equivalent to turning the
MP modem off and on. This terminates any data
connection and causes the MP modem to perform a
restart. (Stored settings are not lost.)
Figure 4-2: The MP modem reset button.
Power indicator
Receive (Rx)
indicator
Transmit (Tx)
GPS indicator
indicator
Table 4-1: LED operation
LED Behavior Indicates
Power Off MP modem is not powered.
On solid MP modem has established a network connection.
Tx Flashing MP modem is transmitting data.
Rx Flashing MP modem is receiving data.
GPS Off GPS module is not active.
Solid GPS module is active and providing valid fixes.