Sierra Wireless AirLink FXT Series, User Manual

Page: 111 / 136

WA_DEV_FEX20_UGD_002 Rev 002 April 26, 2010 111
16. Reliability Standards: Compliance
and Recommendations
16.1. Reliability Compliance
The Fastrack Xtend is compliant with the following requirements.
Table 77: Standards Conformity for the Fastrack Xtend Series
Abbreviation Definition
IEC International Electro technical Commission
ISO International Organization for Standardization
16.2. Applicable Standards Listing
The table hereafter gives the basic list of standards applicable to the Fastrack Xtend.
Note: References to any features can be found from these standards.
Table 78: Applicable Standards and Requirements for the Fastrack Xtend
Document
Current
Version
Title
IEC6006826 7.0 Environmental testing - Part 2.6: Test FC: Sinusoidal Vibration.
IEC60068234 73
Basic environmental testing procedures part 2: Test FD: random vibration
wide band - general requirements.
Cancelled and replaced by
IEC60068-2-64 . For reference only.
IEC60068264 2.0
Environmental testing - part 2-64: Test FH: vibration, broadband random and
guidance.
IEC60068232 2.0
Basic environmental testing procedures - part 2: Test ED: (procedure 1)
Withdrawn & replaced by
IEC60068-2-31 . For reference only.
IEC60068231 2.0
Environmental testing part 2-31: Test EC: rough handling shocks, primarily
for equipment-type specimens.
IEC60068229 2.0
Basic environmental testing procedures - part 2: Test EB and guidance:
bump.
Withdrawn and replaced by
IEC60068-2-27 . For reference only.
IEC60068227 4.0 Environmental testing - part 2-27: Test EA and guidance: shock.
IEC60068214 6.0 Environmental testing - part 2-14: Test N: change of temperature.
IEC6006822 5.0 Environmental testing - part 2-2: Test B: dry heat.
IEC6006821 6.0 Environmental testing - part 2-1: Test A: cold.
IEC60068230 3.0
Environmental testing - part 2-30: Test DB: damp heat, cyclic (12 h + 12 h
cycle).
IEC6006823 69 w/A1
Basic environmental testing procedures part 2: Test CA: damp heat, steady
State.
Withdrawn and replaced by
IEC60068-2-78 . For reference only.
IEC60068278 1.0 Environmental testing part 2-78: Test CAB: damp heat, steady state.