Configuring the Router 109
Configu
ring th
e Router
DNS Mode
The
DNS Mode
setting specifies how the DNS servers (that the DHCP clients are to communicate
with) are obtained.
1.
Log in to the home page.
2.
Click the
Advanced Settings
button.
3.
Click
Router > LAN
.
4.
Set
DNS mode
to one of the following:
䡲
Auto
: Use the DNS server specified by Sprint.
DNS Relay
is enabled by default.
䡲
Manual
: The router assigns DHCP clients the DNS servers specified in the
Manual DNS
Server #1
and
Manual DNS Server #2
fields.
Use this option to access a DNS server that provides customized addressing or if you have
a local DNS server on your network.
If
DNS Relay
is disabled, the router rejects DNS requests targeting the internal DNS proxy.
For information on DNS Relay, see “LAN Section of the Router Tab” on page 105.
Port Forwarding Section of the Router Tab
Normally, incoming traffic (from the Internet) is blocked. However, port forwarding lets you forward
incoming traffic to specific ports and devices (per their local IP address) on your network. For
example, you can configure port forwarding so that:
●
You can access your Remote Desktop from the Internet (by specifying the WAN [public] IP
address that the Overdrive 3G/4G Mobile Hotspot is using).
●
Internet users can access a Web, FTP, or email server, or gaming or Internet application hosted
by your computer.
Note:
Port forwarding creates a security risk. When not required, port forwarding should be disabled.
Port forwarding does not apply to normal browsing, file downloading, running most online games or
other applications hosted on the Internet. (Some online games require port forwarding.)
Before you can use or configure port forwarding, you must enable it. See “Enabling Port
Forwarding” on page 110.
From the
Port Forwarding
section of the
Router
tab of the Advanced Settings window, you can:
●
Enable port forwarding for an application. See “Enabling Port Forwarding for an Application” on
page 110.
●
Remove an application from the port forwarding list. See “Disabling Port Forwarding for an
Application” on page 110.
Summary of Contents for AirCard W801
